Wacker Neuson CT24 Gasoline Walk-Behind Trowel

Code: 46-8776

Specialist For Edging with Honda Engine, 3.5 hp

Wacker Neuson’s smallest trowel offers a valuable job site solution. The CT 24
 is perfect for finishing concrete along edge sections, around pillars and for small surfaces. This machine improves productivity while providing more ergonomics to the operator. The folding center pole makes transporting easy and the guide handle reduces vibrations, thus allowing comfortable working.

In Stock

Description

  • Patented dynamically balanced design for easy and comfortable operation
  • Perfect results in all edging areas and in small areas
  • Low vibration handle reduces hand/arm vibration for reduced operator fatigue and increased production

Specifications:

  • Dimensions: 60.9″L x 24″W x 41″H
  • Weight: 160 lb.
  • Troweling diameter: 24 in.
  • Pitch range: 0° – 15°
  • RPM – area: 90–141 rpm
  • Quantity of blades: 4
  • Engine / Motor: Air-cooled single-cylinder four-cycle gasoline engine
  • Engine / Motor manufacturer: Honda
  • Engine / Motor type: GX120
  • Displacement: 7.3 in.3
  • Operating performance (SAE J1349): 3.5 hp
  • At rpm: 3,600 rpm
  • Fuel consumption: 0.34 gal./hr.
  • Tank capacity: 2.6 qt.

Related products

  • Concrete & Masonry

    Slurry Slurp
    • Contains and removes water and slurry generated during core drilling
    • Save at least 10 minutes on every hole cut
    • Molded from a durable, lightweight polymer
    • Patented design allows the SLURRY SLURP to be self-attaching to concrete walls (with over 35 lb. of force) and floors using the suction from the wet/dry vacuum
    • No other attachment hardware is needed. Attaches in seconds
    • Supplied in two sizes for drilling holes up to 10″
    (0 reviews)
    Read more
  • Concrete & Masonry

    Portable Water Tank

    4 Gallon capacity, all metal construction.

    (0 reviews)
    Read more
  • Concrete & Masonry

    36″ Gas Concrete Trowel

    5.5 HP 167 lb. 60–100 RPM 0-15° Pitch

    (0 reviews)
    Read more
  • Concrete & Masonry

    Wacker Neuson CT48-11A Gasoline Walk-Behind Trowel

    Gasoline-Powered Trowel with Honda Engine, 9.5 hp, with Handle Installed

    With a trowel diameter of 48-inches, the models of the CT48 trowel range are ideal for finishing medium large areas. The trowels are optimally balanced, therefore they can be effortlessly controlled in the wide range of speeds. The transmission brake, electronic safety switch and engine speed sensor offer additional triple protection for the user. In an emergency situation the device will simply switch off and the handle will come to a stand-still after no more than a three-quarter turn. Furthermore, the unit will only start if the throttle lever is set to zero. This prevents an inadvertent rotation of the handle on start-up.

    (0 reviews)
    Read more